Frame housing chassis plinth casing for Thorens turntables. For easy and quick assembly.No changes to audio and power cords are necessary. 145, 146, 147, 160, 165, 166 and all variations. The housing consists of 25mm MDF side panels and a 16mm thick base plate of the same material. It was painstakingly varnished with several layers of high-gloss varnish with appropriate intermediate sanding and sealed with clear varnish. The chassis is equipped with height-adjustable spikes so that the turntable is decoupled from low-frequency vibrations.
Resonance and feedback are thus effectively prevented. The base plate is removable and has 3 holes to correctly adjust the Thoren's suspension when the housing is closed. Basic dimensions: width 45cm, depth 36cm, frame height 8cm (with spikes 11cm). Converting your record player is easy and can be completed in just a few steps.
Disconnect the turntable from the mains. Remove the base plate and loosen the cable fixations. Remove 4 screws on the corners of the top plate (under the plastic caps) and take the turntable out of the old frame. Guide the cable through the existing opening (fix the audio and mains cable in the housing) and mount the Thorens in the new housing... If you have any questions about assembly, we are at your disposal.
Guide the cable through the existing opening (fix the audio and mains cable in the housing) and mount the Thorens. This item is in the category "Consumer Electronics\TV, Video & Home Audio\TV, Video & Audio Parts\Record Player, Turntable Parts". The seller is "art-and-sound" and is located in this country: DE. This item can be shipped worldwide.