Bremskühlung Ankerbleche Motorsport Suitable For BMW F2X F3X Models 63mm Alu. The description of this item has been automatically translated. Anchor plates for brake ventilation for your BMW F2X F3X.Our anchor plates are used to increase the performance of your vehicle. Our sheets replace the originals 1:1. They are attached to the original points. Our products have been used in motorsport since 2018 and bring significant added value to the driver. We recommend the product especially for drivers who occasionally drive tourist trips or TrackDays.
Thanks to the integrated air connection, it is possible to attach a hose to the anchor plate. The air reaches the brakes through the hose, which is to be mounted on the front of the vehicle so that the opening faces the wind. Since the air is fed into the pot of the brake disc, the disc cools down significantly without warping or becoming crooked.
The temperature is significantly reduced. Due to the way the air is guided into the brake disc pot, it doesn't matter how big your brake disc is. This not only has the advantage of better braking performance, but also the reduction in wear is a big plus. This also minimizes the risk of fading. Our anchor plates were designed using CAD and manufactured on the most modern CNC processing machines.The hose connections are then welded on. When this work is done. A special paint is applied to the metal sheets.
This is not only heat-resistant, but also resistant to. Most car cleaners, brake fluid and brake cleaner. We have recently started offering our anchor plates in two variants. These can be selected from the drop down menu.The matching air inlet funnels can also be ordered directly for the anchor plates. These are available in different versions depending on the model. Minimization of the thermal load for the braking system. Wear is reduced on the brake disc and brake pads. Improved braking performance, safe braking feel.
No need to adjust the steering knuckle. 1x anchor plate set front axle (1x left, 1x right) The plates do not fit the M models!This is a pre-order product. We offer you the all-round service, starting with development, design and production right through to the coated component. This component is an item designed and manufactured for motorsport, so it is not approved for vehicles in general road traffic. When used on a vehicle approved for road traffic, the user must independently check whether this affects the operating permit. We therefore recommend that you coordinate the installation with your TÜV inspector beforehand!